Professional Bathtub Refinishing, Tile Resurfacing & Countertop Reglazing in Denver
Your bathtub, tile, or countertop doesn't need to be ripped out and replaced. Fresh Look Refinishing restores surfaces to like-new condition in a single day — at up to 75% less than the cost of replacement. Residential and commercial. Licensed, insured, bonded, BBB A+ rated.
Free phone estimates · Same-week scheduling available · Written warranty on every job · No subcontractors
Stop Paying for Demolition You Don't Need
Replacing a bathtub means ripping out plumbing, tearing up tile, hauling debris, and spending $3,000–$8,000 before you pick a faucet. Refinishing — also called reglazing, resurfacing, or recoating — restores the same surface for a fraction of the cost, in a fraction of the time, with zero demolition.
Full Replacement
- $3,000–$8,000+ for bathtubs
- 3–5 day project minimum
- Demolition, plumbing, drywall, tile
- Bathroom completely unusable
- Dust, noise, debris throughout your home
- Permits and inspections in many cases
Professional Refinishing
- $450–$650 for most bathtubs
- Completed in a single day
- No demolition, no plumbing changes
- Surface ready to use in 24–48 hours
- Minimal disruption to your routine
- No permits required
Wondering if refinishing is right for your project? We'll tell you straight — even if the answer is no.
Get a Free Phone EstimateComplete Surface Restoration for Residential & Commercial Properties
From single-family homes to apartment complexes and hotel renovations, we handle bathtub refinishing, tile resurfacing, countertop reglazing, sink restoration, and our exclusive Custom Spray Marble Finish. Every service uses commercial-grade coatings, not consumer-grade paint.
Bathtub Refinishing
Porcelain, cast iron, fiberglass, acrylic, and steel tubs. Chips repaired, stains eliminated, surface reglazed to factory-smooth finish. Also called bathtub reglazing or tub resurfacing. Most jobs $450–$650, completed in one day.
Full details & pricing →
Tile Refinishing
Ceramic, porcelain, and natural stone tile resurfacing for showers, tub surrounds, backsplashes, and floors. Eliminates mold, mildew, and discoloration embedded in porous grout. Change the color, restore the shine, extend the life.
Full details & pricing →
Countertop Resurfacing
Laminate, tile, cultured marble, and solid surface countertops restored or completely transformed. Upgrade to our Custom Spray Marble Finish for a high-end stone look without the high-end price. Kitchen and bathroom counters, vanities, bar tops.
Full details & pricing →
Sinks, Shower Pans & More
Kitchen sinks, bathroom sinks, pedestals, shower pans (shower floors), fireplaces, and custom surfaces. If it has a factory coating, we can refinish it. Stainless, porcelain, fiberglass, cast iron — all substrates.
Full details & pricing →Seamless Tile Conversion
Eliminate grout lines entirely. We apply a seamless, stone-look coating over your existing tile, turning a grout-scrubbing nightmare into a single smooth surface. No more mold in grout lines. No more re-caulking. Ideal for showers and tub surrounds.
Full details →Custom Spray Marble Finish
Our proprietary, hand-sprayed marble-look finish. Each piece is unique — real veining, real depth, real elegance. Applied over existing countertops, vanities, and tub surrounds. The look of natural marble at a fraction of the cost. Exclusive to Fresh Look in Denver.
Full details →Property Managers & Commercial Clients
Fresh Look works with property management companies, apartment complexes, hotels, Airbnb hosts, and real estate investors across the Denver metro. When you're turning units between tenants or refreshing rooms between guests, refinishing gets surfaces back to like-new condition in hours instead of days — with no demolition, no plumbing, and no downtime.
We handle volume. Whether you need one bathtub reglazed or 50 units turned in a quarter, we deliver consistent quality on every surface. Our commercial clients come back because we show up on time, finish on schedule, and the work holds up under heavy use.
Our Chemical Bonding Refinishing Process
This isn't "bathtub painting." Professional refinishing uses industrial coatings that chemically bond to the original surface, creating a molecular-level weld that resists peeling, chipping, and water damage for years.
Deep Clean & Inspection
We strip every trace of soap scum, mineral deposits, oils, and old caulking. The surface is inspected for chips, cracks, rust spots, and structural issues. Any problems get addressed now — not buried under a coating.
Repair & Surface Prep
Chips and cracks are filled with bonding compounds. The entire surface is etched and sanded to create the micro-profile that coatings need to grip. This is the step that separates professionals from amateurs — poor prep is why DIY kits peel in months.
Prime Coat
A bonding primer designed specifically for the substrate (porcelain, fiberglass, cast iron, etc.) is applied. This primer chemically reacts with the etched surface, forming the anchor layer that everything else builds on.
Top Coat & Finish
Multiple layers of commercial-grade urethane or acrylic topcoat are spray-applied in a controlled, dust-free environment. The result is a factory-smooth, high-gloss or satin finish that's resistant to chemicals, staining, and daily wear. Cure time: 24–48 hours before normal use.
Why does prep take longer than spraying? Because prep IS the job. The coating itself takes about an hour to apply. But the 1.5–2 hours of cleaning, repairing, etching, and priming before that are what make the difference between a refinish that lasts 10+ years and one that peels in 6 months. We never rush prep.
If It Has a Factory Finish, We Can Refinish It
Porcelain
Bathtubs, sinks, tile. The most common substrate we refinish. Porcelain responds exceptionally well to chemical bonding coatings.
Cast Iron
Heavy, durable tubs with porcelain-enamel coatings. Worth refinishing — a cast iron tub in good structural shape will outlast anything new on the market.
Fiberglass
Tub/shower combos, shower pans, surrounds. Fiberglass yellows and cracks over time but refinishes beautifully with the right primer system.
Acrylic
Modern tubs and shower units. Acrylic requires a specific primer and prep sequence — our team knows the difference, which is why the finish lasts.
Ceramic Tile
Shower walls, tub surrounds, backsplashes, floors. We refinish the tile and seal the grout in one process. Change color, eliminate staining, restore the surface.
Laminate & Solid Surface
Countertops, vanities, bar tops. Laminate and Corian-type surfaces can be refinished or transformed with our Custom Spray Marble Finish.
#2 Most-Reviewed Refinishing Company in Colorado
4.7 out of 5 stars across 195+ verified Google reviews. We're second only to Miracle Method — a national franchise — in total review volume across the entire state.
"Booked a quote on a Tuesday, had a brand-new-looking tub by Friday afternoon. The crew was on time, left the bathroom cleaner than they found it, and walked me through the warranty before they left."
Denver, CO
"We were quoted $4,200 to replace our master tub. Fresh Look refinished it for a fraction of that and honestly it looks like a new tub. We've had it over a year now and it still looks perfect."
Highlands Ranch, CO
"Professional from the first phone call through the walk-through. They explained everything, gave me a real warranty in writing, and the finish has held up beautifully. I've referred them to three neighbors."
Aurora, CO
"We manage 120 rental units and Fresh Look handles all of our tub and tile turnovers. Consistent quality, always on schedule. They understand the urgency of getting units rent-ready."
Property Manager — Denver Metro
Serving the Entire Denver Metro & Front Range
We provide bathtub refinishing, tile resurfacing, countertop reglazing, and all of our specialty services throughout the Denver metropolitan area including Denver, Aurora, Lakewood, Littleton, Arvada, Westminster, Thornton, Broomfield, Centennial, Highlands Ranch, Parker, Castle Rock, Golden, Englewood, Commerce City, Brighton, Northglenn, Federal Heights, and surrounding communities along the Front Range.
Our shop is located at 8500 E Mississippi Ave, Denver, CO 80247. We travel to your location for all services — residential and commercial.
Refinishing Questions We Hear Every Day
How long does bathtub refinishing take?
Most bathtub refinishing jobs take 3–4 hours on site. Prep (cleaning, repair, etching, priming) takes 1.5–2 hours and the topcoat application takes about 1 hour. The surface is dry to the touch in 2–4 hours and ready for normal use in 24–48 hours depending on coating type and bathroom ventilation.
How much does bathtub refinishing cost in Denver?
A standard bathtub refinish in the Denver area typically runs $450–$650. Factors that affect price include tub size, material, condition (number of chips/cracks to repair), and color choice. We provide exact quotes over the phone — no guessing, no bait-and-switch.
Is refinishing the same as reglazing or resurfacing?
Yes. Refinishing, reglazing, resurfacing, and recoating all describe the same professional process: cleaning, repairing, priming, and applying a new topcoat to an existing surface. Different regions use different terms, but the work is identical.
How long does a refinished bathtub last?
A professionally refinished bathtub lasts 10–15 years with normal residential use. The key factors are surface prep quality (which determines coating adhesion), coating grade (we use commercial-grade, not consumer-grade), and maintenance (non-abrasive cleaners, no standing water). Our written warranty covers defects in materials and workmanship.
Can you refinish a tub that's already been refinished?
Yes. We refinish previously refinished tubs regularly. The process requires additional prep to properly bond to or remove the existing coating, but the end result is the same: a smooth, durable, like-new finish.
Do you work with property managers and commercial clients?
Absolutely. We work with property management companies, apartment complexes, hotels, Airbnb hosts, and real estate investors across Denver. We handle volume projects and understand the urgency of unit turnovers. Same quality, commercial pricing.
Ready to See What Your Surfaces Can Look Like?
Call us. We'll give you a straight answer in plain English — what it costs, how long it takes, and whether refinishing is the right move for your project. Free phone estimate, no obligation, no pressure.
Licensed in Colorado · Fully insured · Bonded · BBB A+ Accredited · Written warranty on every job